• 

  Metal Expansion Joints Safeguard Southeast Asia HPAL Nickel Projects

  Indonesia and the Philippines dominate global laterite nickel ore resources, with numerous HPAL (High-Pressure Acid Leaching) hydrometallurgy projects under construction and operation to supply nickel and cobalt for new-energy batteries. HPAL pipelines handle hot, abrasive acidic slurry under extreme working conditions. Our custom-engineered metal expansion joints (bellows compensators) serve as critical flexible pipeline components, delivering reliable protection for long-term continuous plant operation. The HPAL process runs at 240~270°C and 3.5~5.0 MPa. Pipes carry sulfuric acid slurry loaded with solid particles. Frequent temperature changes from start-up, shutdown and load shifts create heavy thermal expansion and contraction. Without properly designed expansion joints, thermal stress concentrates on welds and flanges, causing cracking, acid-slurry leakage and costly unplanned shutdowns. Our metal expansion joints are purpose-built to solve these challenges for Southeast Asian nickel projects. Our metal expansion joints fulfill four core functions on-site: 1. Absorb Multi-Directional Thermal Displacement and Release Pipeline Thermal Stress Our bellows absorb axial expansion, lateral offset and angular deflection from temperature cycles. They relieve thermal stress and reduce thrust on high-pressure autoclave nozzles, flanges and weld joints, greatly lowering leakage risks. For long slurry piping layouts at these nickel plants, our expansion joints also simplify anchor support design and cut...

• 

  # Matalé Water Supply System Project: Reliable Valve Solutions for Safe and Efficient Water Supply

  Municipal water networks are the backbone of every growing city. As demand rises and infrastructure ages, water utilities and engineering contractors need reliable components that keep supply stable, clean, and efficient. The Matalé Water Supply System Project is a recent example of how the right valve technology supports these goals. Project Overview The Matalé Water Supply System Project was developed to improve urban water transmission and distribution. At its core, the system relies on high-performance gate valves to regulate flow and provide reliable shut-off across the pipeline network. By enabling precise flow control, the valves help maintain steady pressure, reduce water loss, and simplify maintenance operations. Why Gate Valves Matter in Water Supply Gate valves are widely used in large-diameter water pipelines because they offer: – Full-bore flow when open, minimizing pressure drop and energy use. – Reliable isolation during repairs, expansions, or emergency shutdowns. – Long service life in continuous water-service environments when manufactured from corrosion-resistant materials. In the Matalé project, these characteristics directly contribute to safer, more dependable urban water delivery. Key Project Benefits Safe & Reliable Operation The valve solution ensures stable water supply and protects the overall pipeline system. Dependable sealing and robust construction reduce the...

• 

  Breakthrough Customization Technology: Changhong Electromechanical Wins Special Repairer Project

  Recently, Henan Changhong Electromechanical Equipment Co., Ltd. has successfully won a special customized repairer procurement project, relying on outstanding technical R&D capabilities, strict quality control system and professional one-stop customized service. This project fully demonstrates our core competitiveness in solving personalized and high-difficulty product customization problems for global customers, and further consolidates the brand reputation of Changhong Electromechanical in the industrial repair equipment industry. In the early stage of the project, the customer had a batch of high-standard repairer procurement demands, which involved special customized product parameters and exclusive technical process requirements different from conventional standard products. To find a qualified supplier, the customer has consulted many domestic and foreign manufacturers in the industry successively. However, most manufacturers are restricted by limited technical capabilities and backward production processes: some cannot complete the personalized parameter customization at all, and some fail to meet the customer’s strict quality and precision standards after trial production. For a long time, the customer’s procurement project was stranded due to the lack of reliable cooperative manufacturers. Faced with the industry-wide difficult customization demand, the customer finally sent a detailed inquiry document, complete product special parameter indicators and technical requirement specifications to Henan Changhong Electromechanical Equipment Co.,...

• 

  Efficient Infrastructure: The Role of Pipe Repair Clamps in Modern Municipal Water Supply

   Addressing the Crisis of Aging Urban Water Infrastructure In the heart of every growing city lies a complex network of aging pipelines—many of which are decades old. For municipal water departments, the challenge isn’t just providing water, but preventing its loss. Pipe leakages not only waste a precious resource but also threaten the structural integrity of urban roads and buildings. This is where Pipe Repair Clamps have become the “first responders” of municipal engineering. As a cost-effective and rapid solution, they are transforming how cities manage emergency repairs without the need for massive excavations or total system shutdowns. Why Municipalities Prioritize Repair Clamps Over Pipe Replacement When a water main breaks, every minute counts. Traditional pipe replacement can take days, involving heavy machinery and prolonged water outages for thousands of residents. Repair clamps offer a smarter alternative: Non-Revenue Water (NRW) Reduction (Financial & Efficiency) Water loss is a direct financial drain. High-quality stainless steel repair clamps provide a 100% leak-proof seal, immediately stopping the loss and helping water utilities hit their NRW reduction targets. Zero-Downtime Repairs (Risk Management) One of the greatest advantages is the ability to perform under-pressure repairs. Municipalities can fix a leak while the water is still flowing, avoiding the high risk...

• 

  Rubber Expansion Joints in Water and Wastewater Treatment Systems

  Water supply, wastewater treatment and industrial water systems must operate reliably under conditions that may include pump vibration, equipment start-up and shutdown, fluid movement, installation tolerances and ongoing maintenance requirements. Henan Changhong Electromechanical Equipment Co., Ltd. provides rubber expansion joints and related piping connection solutions for customers in these demanding applications. Rubber expansion joints are commonly installed between pumps, valves, pipelines and other connected equipment. Their flexible construction can help absorb vibration and accommodate limited movement within the design range, reducing the transmission of mechanical stress to adjacent piping and equipment. They can also support more adaptable connections where installation conditions or maintenance access require additional flexibility. Key Functions in Water and Wastewater Treatment Applications Rubber expansion joints can provide several practical functions in water and wastewater treatment systems: Vibration and noise control: Pumps, fans and other operating equipment can generate vibration. A properly selected rubber expansion joint can help reduce the transmission of vibration to connected pipes and equipment. Accommodation of limited movement: Equipment operation, temperature changes and installation tolerances may create movement at connection points. A rubber expansion joint can provide flexibility within its specified movement range. Improved equipment connections: In pump rooms, wastewater treatment plants and pipe...

• 

  Critical Piping Components for Grudziadz CCGT Power Plant Reliable Operation

  The Grudziadz CCGT Power Plant, a landmark 560MW high-efficiency combined-cycle gas turbine project invested by ORLEN Group and Energa, stands as a core infrastructure for Poland’s energy transition and national power security. Equipped with advanced Siemens SGT5-4000F gas turbines and three-pressure reheat HRSG systems, the plant delivers stable, low-carbon power supply for up to 1 million local households, effectively balancing renewable energy volatility and reducing regional carbon emissions. Behind the core power generation equipment, high-performance metal expansion joints, rubber expansion joints, and industrial valves serve as the essential piping backbone, ensuring long-term stable, safe, and low-maintenance operation of the entire power system. Modern CCGT power plants feature complex and rigorous fluid pipeline systems, covering natural gas fuel supply, high-temperature steam circulation, feedwater and condensate treatment, circulating cooling water, flue gas and air duct systems. Frequent unit start-stop operations cause drastic temperature fluctuations, leading to severe thermal expansion and contraction of large-diameter pipelines. Meanwhile, rotating equipment such as gas turbines, fans, and water pumps continuously generates mechanical vibration and pressure pulsation. Without professional compensation and control piping components, the pipeline system will face excessive thermal stress, structural displacement, fatigue cracking, medium leakage, and even unplanned unit shutdowns, severely affecting power generation...